corso avanzato stampa 3d

3D Printing Advanced Course for Technical Materials

500,00 

Advanced course dedicated to technical materials for FDM 3D printing. How to manage slicing, adhesions and design for the most advanced materials.

The next available dates are:
—-

Clear

SKU N/A Category

Description

ONLINE COURSE
In normal times the course takes place at WASP Headquarter. To face the Covid 19 Emergency  Due to the limitations and our desire to better preserve everyone’s health.

Why do you have to choose this course?
You have to choose this 3D printing Advanced course for technical materials if you would like to improve your skills on the 3D printing of these materials, which are particular and with specific uses, often not easy to print.

This course is dedicated to 
The 3D printing Advanced course for technical materials is dedicated to you that have previous skills. You can optimize the 3D printing of technical materials in you business for the creation of functional prototypes or parts to be used in production.

Minimum required skills 
You must have participated to our 3d printing basic course (or the advanced one). Before to partecipate you have to try what did you see in the past courses. The course will have a maximum of 10 subscriber, minimum 4. Your Laptop is not compulsory, but it’s better to have it to follow the software installation.

What you will get with this course 
You will learn to 3D print with technical materials. At the end of the course you will receive the participation certificate.

PROGRAM

TOPICS

  • Overview of FDM 3D printing materials;
  • Functional prototypes and production parts;
  • How we evaluate the performance of a material;
  • Thermal and chemical resistance;
  • Technical materials: ABS, ASA, HIPS, PA + Carbon, PC, TPU, PP, PPS;
  • Post processing based on the material (processes, solvents);
  • Material shrinking management;
  • Management of the material adhesion to the printing bed;
  • Slicing for advanced materials (with Simplify 3D);
  • Create a print profile with stress tests;
  • How to choose the ideal extruder and nozzle.

Useful informations

The course will have a maximum number of 10 partecipants, minimum 4.

Professor

Giulio Buscaroli
Giulio is our expert in technical and medical materials 3d printing. He and his skills will be at your disposal during these training hours.

Calendar 
The next available dates are listed in the initial product description. In case of non-activation we will propose the following date.

Normally the advanced 3D printing course is held on Friday. The course lasts 5 hours, from 10:00 to 12.30 and from 14 to 16.30 approximately. The course will be held in Italian or English depending on the requests.

Prices
This advanced course costs 500 Euro (VAT Excluded) each person. To activate the course it will be necessary to have minimum 4 persons, maximum 10 participants. (excluding VAT) per person. At the end of the course you will receive the participation certificate.

How to get there

Places

ONLINE COURSE
In normal times the course takes place at WASP Headquarter. To face the Covid 19 Emergency  Due to the limitations and our desire to better preserve everyone’s health, the next starting courses will be held online in WEBINAR mode.
We will carry out the courses at our office as soon as possible.  Find the information to reach us below!

WASP operational headquarters: Via Castelletto 104 Massa Lombarda. You will see 3D printers of all sizes, prints of all types and a lot of creativity. How to get there?

  • By car: A14 Highway, exit at Imola, then follow the signs for Massa Lombarda, Fruges.It’s easy but it’s better to set your car navigator!
  • By train: It is a bit complicated to get to Massa Lombarda by train, there is a station but it is poorly served: you can find timetables on www.trenitalia.it or on https://www.zaganellibus.com/wp-content/uploads/2019/10/MODIFICHE-LINEA-177-OTTOBRE-2019.pdf.
  • By bus: Bus is better if you arrive from Bologna, you can take a TPer bus. https://www.tper.it/
  • By plane: the closest airport is Bologna. Once landed, you must arrive in the center and take the TPer bus to Massa Lombarda. https://www.tper.it/ or a train of www.trenitalia.it.

Reviews

There are no reviews yet.

Be the first to review “3D Printing Advanced Course for Technical Materials”

Your email address will not be published. Required fields are marked *

Stampante 3D delta -Delta WASP 2040 PRO

Delta WASP 2040 PRO

Accurate and reliable on all materials with…

2.370,00 

Extruder + filament driver 1.75 mm for Power WASP

Spare part for 3D pinters Power WASP, motor…

249,00 
Filamento in HIPS - WASP

S2 LIMONENE SOLUBLE HIPS White

HIPS filament diameter 1.75 mm - 1 Kg

28,00 
Dimafix Pen

Dimafix Pen

Dimafix Pen is an intelligent adhesive in a…

15,00 

Elastic Bands Kit Delta WASP 2040

Kit of 3 elastic bends of 30 cm, for use on…

1,50 

COURSE 3D PRINTING + CLAY

WASP presents workshop to improve your 3D…

Filamento in ASA - WASP

P2 ALLOWS POLISHING ASA Black / White

ASA Filament diameter 1.75 mm - 1 Kg

35,00 
Medical PLA Filament

PCL Polycaprolactone White

PCL filament 1.75 mm - 0,25 Kg

34,00 

Elastic Bands Kit Delta WASP 4070

Kit of 3 elastic bands of 47 cm for use on…

3,50 

Simplify3D® Software

Expand your printing options with…

137,00 

Privacy Preference Center