Description
Ceramic 3D Printer fast and accurated with any kind of ceramic material. It’s open and accessible to each of the 3 sides to allow operator’s interaction during the printing process .
For objects taller than 40 cm and up to 1 m. you can even print directly from the floor , on the contrary for very little objects you can print using an additional steel printing plate that can be mounted at 60 cm from the floor ( printing volume 400 mm x 450 mm Hight).
If you move the 3D printer in an other place it continues printing with no interrupion. you do not need to wait till the first object has dried.
CONFIGURABLE TOOLS:
LDM WASP Extruder: 1.5 mm, 2 mm and 3 mm nozzle diameter (standard)
LDM WASP Extruder XL: 4 mm, 6 mm and 8 mm nozzle diameter (recommended for large prints)
scopri di più – richiedi preventivo
TECHNICAL INNOVATION
No stop print: You can move the printer and not remove the object – each time the printing process has finished (this avoids to wait till the object has dried).
Printing or from ground or from 2 printing beds at different Height.
Extruder with controlled dosage thanks to a screw (2013).
Controlled air pressure on the printer.
Perfect stability thanks to new sliding-system on bearings.
Dedicated Firmware.
INCLUDED
1 LDM WASP extruder with metal nozzle diam. 1.5 mm, 2 mm and 3 mm.
1 Tank 5L.
1 Printing bed in marine multilayered.
12,5 kg of red earthenware (clay mixture) TECHNICAL DETAILS >>.
NB. The air compressor 8 bar 50 l and the pipe that connects it to the 3D printer are not supplied by WASP.
A useful tip: It’s a nylon pipe and it’s a tool generally supplied by the air compressor supplier. If you don’t have it you can buy it from any hardware store of the length you need, ask for an 8 mm or 5/16″ (external dimension) nylon pipe.
Awesome solution for 3D printing Clay
This has a bright future..!! It’s revolutionary.