Aluminium Printing Bed Delta WASP 3MT INDUSTRIAL

693,00 

Accessory for the Delta WASP 3MT INDUSTRIAL 4.0, Delta WASP 3MT INDUSTRIAL printing bed.

Clear

Description

Fibral Aluminium Printing Bed Accessory for Delta WASP 3MT INDUSTRIAL 4.0, Delta WASP 3MT INDUSTRIAL.

The 8 mm fibral aluminium printing bed allows to obtain a more stable level in the whole printing surface, thanks to its adjustment process. Furthermore thanks to the high aluminium thermal conductivity we have also improved the heating of the bed. This to avoid surfaces adulteration and to quickly release heat to the object and improve the layer adhesion.

FEATURES
8 mm thick;
fibral with planar surface;
Improved printed piece adhesion with the brushed surface;
Improved thermal conduction.

N.B. Please be sure to have modified the z hight from the menu once the plate has been replaced.

 

MOUNTING

Apply the hairspray to the build plate before putting it in the machine to prevent the spray from getting all over the interior components.

Place the build plate in the machine, and align the three holes on the build plate with the holes on the heating plate.

Screw three M5 x 16 screws into these three holes until the build plate is secured.

To calibrate the printing bed, reduce the hight from the preset value of the difference between 8mm (aluminium plate hight) and the plate used before: menu>prepare>modify hight> – x mm.

Level the plate: menu>prepare>manual level following this sequence:01, 02, 03, 01, 02, 03, 00.

Aluminium Printing Bed Delta WASP 3MT INDUSTRIAL

Aluminium Printing Bed Delta WASP 2040

Accessory for printing plate for  Delta WASP…

110,00 
Aluminium Printing Bed Delta WASP 3MT INDUSTRIAL

Aluminium Printing Bed Delta WASP 4070

Accessory for the Delta WASP 4070, Delta…

132,00 
Aluminium Printing Bed Delta WASP 3MT INDUSTRIAL

Aluminium Printing Bed Delta WASP 60100

Accessory for the Delta WASP 60100 printing…

267,30